Results 1 to 2 of 2

Thread: Sanitary MH and pipe selection

  1. #1

    Question Sanitary MH and pipe selection

    I need to identify the source of all flows into a manhole. This means I need to generate a sanitary sewershed. As a first step I need to select all upstream pipes that flow into the manhole. Since the flow direction is already correctly set up on our pipes in GIS, I was hoping this can be done automatically. Is this possible using InfoWorks ICM? I am new to InfoWorks ICM. All our GIS data is already in InfoWorks ICM and a geodatabase.
    Tim Hayes
    GIS Manager
    City of San Jose Municipal Water System
    San Jose-Santa Clara Regional Wastewater Facility

  2. #2
    Forum Moderator

    Innovyze Employee



    Innovyze Employee



    Join Date
    May 2015
    Posts
    434
    Tim,

    If you have ICM questions I would recommend sending these to support@innovyze.com as there are not nearly as many ICM responders in the forum that if you need technical support this is a much better way to get assistance you need.

    Patrick Moore

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •