Results 1 to 4 of 4

Thread: Pump Controls not functioning as expected

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    May 2014
    Posts
    13

    Pump Controls not functioning as expected

    I am troubleshooting why a pump is not remaining off. Three pumps are set to shut off when the level in a tank hits 113'. One of these pumps continues to turn on unexpectedly. This pump also has controls based on downstream pressure and a VFD setting. However, the results graphs don't make sense given these control points. During the shown time, the tank is full, so all pumps should be off, but pump 1 continues to cycle. Any ideas?
    Capture.JPGcontrols.JPG

    Also here is pump 2 and its controls which correctly shuts off:
    pump2.jpgcontrols2.JPG

    Thanks,
    Ross
    Last edited by RossV; April 12, 2019 at 10:18 AM. Reason: added detail

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •