Results 1 to 3 of 3

Thread: Simulation

  1. #1

    Join Date
    Aug 2013
    Posts
    1

    Simulation

    I have constructed a model in H2O map which has two reservoirs supplying the system. It has run for 24 hrs but the second reservoir is not supplying water from the beginning of the simulation. Any advice on how i can fix this reservoir?

  2. #2

    Join Date
    Apr 2013
    Posts
    4
    Are you pumping directly from the reservoirs? If not, check the HGL of the reservoir relative to the system as it may be insufficient to supply flow.

  3. #3
    Member

    Innovyze Employee



    Join Date
    Mar 2013
    Posts
    72
    Good to compare HGL between the reservoir and the reservoir's connecting junction to the system. You might see a negative flow, which means that the reservoir receives water, instead supplies water.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •