Results 1 to 2 of 2

Thread: WaterCAD to H2ONet Model Conversion

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    May 2018
    Posts
    1

    WaterCAD to H2ONet Model Conversion

    I am working with another company on a modeling a water system, however, I am using H2ONet and they are using WaterCAD. Is there any way to convert the files from WaterCAD to H2ONet without purchasing a license for WaterCAD, as we only need to convert the 1 model and will not be using WaterCAD again.

    The model is quite large so exporting data to Excel is possible, but would be extremely tedious. If anyone has done this before or has any ideas they would be greatly appreciated.

    Thanks

  2. #2
    Forum Moderator

    Innovyze Employee



    Innovyze Employee



    Join Date
    May 2015
    Posts
    420
    Brook,

    One can convert a WaterCAD model to H20NET or InfoWater fairly easily if you have an EPANET export of the scenario you wish to convert obtained form WaterCAD/GEMS.

    As you are an existing Innovyze Customer I was able to find you direct contact information and will send you conversion instructions, but you would need to get someone with WaterCAD/GEMS to export the scenario you wish to model for you.

    Patrick Moore

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •