Results 1 to 2 of 2

Thread: Modeling groundwater wells with a single-point pump

  1. #1

    Modeling groundwater wells with a single-point pump

    I'm having issues modeling my client's system. The system is based on individual groundwater wells that are controlled based on tank settings.

    I have input the data into the model and the model runs on steady state. When I run an EPS, I only get through the first 4 hours before I receive the following error message, "WARNING: Pump WPMP_2 closed due to its inability to deliver head".

    I modeled the groundwater well by subtracting the static head from the pump setting and then adding that elevation to the existing ground elevation. Am I doing this incorrect? And if so, how should I model this?


  2. #2

    Innovyze Employee

    Join Date
    Mar 2013
    The message looks like a warning message. Did the pump get closed after 4 hours?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts