Results 1 to 2 of 2

Thread: Representation of hole cored into pipe

  1. #1

    Lightbulb Representation of hole cored into pipe

    We have recently received data from a CSO survey that shows the continuation pipe with a 225mm hole cored into the bottom of the pipe. The flows drop down this hole into a deeper sewer with flows conveyed downstream.

    Has anyone any experience in the best way to represent this 225mm "hole"

    Any help would be appreciated.


  2. #2
    Senior Member

    Innovyze Employee

    Join Date
    Feb 2013
    You might model the hole as vertical pipe, an orifice, weir, head/discharge curve based on a node or break node place at the location of the hole and let the flow drop to the deeper sewer.
    Best Regards,
    Bob Dickinson

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts