Results 1 to 4 of 4

Thread: infoSWMM Profile Plot (input)...! Labels not showing

  1. #1
    Member
    Join Date
    May 2013
    Posts
    48

    infoSWMM Profile Plot (input)...! Labels not showing

    Ver 13 Update 001.

    I cant seem to get labels etel to show anymore!

    Profile (input) plot options, has following checked:
    Label Node ID
    Label Link ID

    But no labels show.
    (also no legend)

    EDIT1: neither can I get following to work anymore:
    a.refresh (
    Gives WARNING 50120: inable to retrieve graph data. However a new plot of same links finds the new data ok)
    b. Zoom to (ie highlight) the links
    c. Legend (shows symbol but no text)
    d. Save profile selection
    e. Launch HGL PLOT (a
    ltho Creating and HGL profile directly from Report Manager works ok)


    Anybody experiencing similar symptoms?
    Anyone who can tell me where I am going wrong.?

    Thanks
    Stewart.
    Last edited by Stewart Sargent NZ; November 4, 2014 at 02:19 PM. Reason: Addional symptoms (listed under EDIT1)

  2. #2
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146
    Hello Stewart,
    This is a known problem in the input HGL plot that has been fixed in InfoSWMM v13 update 3 and InfoSWMM update 4. You can download update 3 from www.innovyze.com but update 4 will be released after we finish adding the new features from EPA SWMM 5.1.007. InfoSWMM v13 update 3 uses the older EPA SWMM 5.1.006 engine. My apologies for the issue.
    Best Regards,
    Robert Dickinson

  3. #3
    Member
    Join Date
    May 2013
    Posts
    48
    Thanks Robert for the timely post and the SOLUTION
    We will update to#3
    Stewart.
    S w Sargent, Services Development Engineer, Marlborough District Council, New Zealand.
    (40 years of modelling in 4 countries, thus far , and still learning)

  4. #4
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146

    More Information for Stewart

    Quote Originally Posted by Stewart Sargent NZ View Post
    Thanks Robert for the timely post and the SOLUTION
    We will update to#3
    Hello Stewart,
    Here is the way the labels look in update 4 of InfoSWMM v13 for the input HGL, I will send you an updated dll for this issue.
    Regards,
    Robert Dickinson
    2014-11-06_0218.jpg

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •