Results 1 to 3 of 3

Thread: Define pump

  1. #1
    Member
    Join Date
    Dec 2016
    Posts
    57

    Define pump

    I have a pump that connects to the users and to one tank. The idea is that when the tank has low water it will receive water, and when the tank has high water level it will provide water (during high demand).
    I am using this pump
    https://www.wcc.nrcs.usda.gov/ftpref...00/6x8x17L.pdf

    1000 GPM, 280 ft, 125 HP, Max WP 175 psi, 1800 RPM, D 17"

    However, the pump only provides 7 GPM, very low considering that is can provide 1000 GPM.
    I provided this NSPH curve:
    1000 GPM - 10 ft
    1500 GPM - 16 ft
    1800 GPM - 22 ft

    I tried:
    i) Constant power 125
    ii)Design point. Design head 280ft, Design Flow 1000 GPM
    iv) Multiple point curve
    0 GPM 290 ft
    1000 - 280
    1500 - 250
    1800 - 220

    Why is the pump giving so little water?
    If I close the pipe of the Tank the simulation fails unbalanced error.Pump.jpg

  2. #2
    Member
    Join Date
    Dec 2016
    Posts
    57
    Solved.
    The pipe before the pump had wrong diameter (very small).
    One more question.

  3. #3
    Forum Moderator

    Innovyze Employee



    Innovyze Employee



    Join Date
    May 2015
    Posts
    433
    Good find. Note any pump is only going to operate where the pump curve meets the system curve and so it can often be a good idea to see when the pump is running where the head and flow are. If they are not near the design point it is often likely that something is impacting either the HGL up or downstream, or in your case if there was something causing a large headloss that pushed the pump way back on its curve. You can often find that by searching the pipe range report for pipes with high headloss. You can use the "filter tool" to select pipes that meet a certain criteria you specify in the output report.

    Data filtering (click if need larger image)
    Output-Datafilter.jpg

    Best to you.

    Patrick

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •