Results 1 to 2 of 2

Thread: InfoWater - Flow issue

  1. #1
    Member
    Join Date
    Feb 2014
    Posts
    33

    InfoWater - Flow issue

    I was checking pipe flows and came across an odd situation. I have a run of pipe that has 700 gpm (Orange) of flow hits a valve that is open with no controls on it and then all of a sudden goes down to 350 gpm (Yellow) until it hits the next node on the line and then goes back up to 700 gpm (Orange). What may be the reason that it would be doing this? There is no demand in this area either.

    FLOW_ISSUE.png
    Thanks
    Martin Majnerick

  2. #2
    Forum Moderator

    Innovyze Employee



    Innovyze Employee



    Join Date
    May 2015
    Posts
    419
    Martin,

    It may be easiest to contact us at support@innovyze.com to look at your model together to resolve.

    You should also verify that there are no duplicate overlapping pipes in the area where flows seem to be disappearing to eliminate that as a possibility.

    Patrick Moore

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •