Results 1 to 3 of 3

Thread: Upgrading from IW 8.6 to 10

  1. #1

    Join Date
    May 2013
    Posts
    1

    Question Upgrading from IW 8.6 to 10

    We're getting ready to perform some GIS upgrades (going to 10.1). During that process we'll be upgrading from IW 8.6 to 10. Will the IW projects upgrade automatically (without issues) after opening?

    From what I can remember, previous updates / upgrades applied to MWH / Innovyze products went smoothly.

    Thank you

  2. #2
    Are you referring to InfoWater or InfoWorks WS? I assume InfoWater.

  3. #3
    Member

    Innovyze Employee



    Join Date
    Mar 2013
    Posts
    72
    I have not experienced any problems about InfoWater V10 to open the projects in the previous version.
    However, I did experience a known problem caused by Arc10.1.
    When adding a base map to the map document, the data frame's coordinate system is altered without any notice. It will cause some InfoWater commands not working well, such as "Zoom to Domain". After recover the data frame's coordinate system to what it should be, those InfoWater commands work again.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •