Results 1 to 3 of 3

Thread: Water spilling to a 1d river reach

  1. #1

    Water spilling to a 1d river reach

    Dear all,
    I am trying to store some surface water (flowing in the 2d domain) before a 1d river reach. For this purpose, I have created an inline bank before the first river cross section (essentially to work as a weir). This inline bank is connecting an upstream dummy break node to a break node in the first cross section of the river reach. My idea here was to direct the water spilling from the inline bank directly to the 1d river reach. Unfortunately, this does not seem to work. Any suggestions?
    Thanks in advance.

  2. #2
    Forum Moderator

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    133
    Your upstream node, the one that sits in the 2D mesh, should be an Outfall node. You also need to build the Inline Bank 2D Connection. See the following blog for more details: http://blog.innovyze.com/2014/07/11/...infoworks-icm/

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Posts
    125
    Wouldn't a porous wall be easier? Porosity zero, obvs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •