Results 1 to 3 of 3

Thread: Waterage Analysis InfoSWMM

  1. #1

    Join Date
    May 2016
    Posts
    2

    Waterage Analysis InfoSWMM

    Hi,

    I was wondering if it's possible to determine how long it takes for flows to travel through the system in InfoSWMM. Basically, is it possible to select a node at the far end of the system and see how long it takes to reach the outfall, or is this something best done by hand with output?

    Thanks,
    Tim

  2. #2
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146
    Hello Tim,
    You can use the trace water quality option to see how long a tracer takes to travel to the outfall from a node
    Regards,
    Robert Dickinson
    2016-05-05_2034.jpg

  3. #3

    Join Date
    May 2016
    Posts
    2
    Hi Robert,

    That worked perfectly! I figured it was something simple I was missing.

    Thanks,
    Tim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •