Results 1 to 2 of 2

Thread: Infoworks WS, Valve %Open vs Flow

  1. #1

    Join Date
    Aug 2013
    Posts
    22

    Infoworks WS, Valve %Open vs Flow

    I created a slow open/close valve using UPC similar to this example (http://blog.innovyze.com/wp-content/...C-Examples.pdf).

    Strangely, the flow doesn't ramp up as the valve opens (see image below). Why is this happening?

    Any help is appreciated.


    PvO.jpg

  2. #2
    Forum Moderator

    Innovyze Employee



    Innovyze Employee



    Join Date
    May 2015
    Posts
    417
    Hi Craig,

    I forwarded on your questions to other members of our support team more knowledgeable in InfoWorks WS and here are their initial thoughts on this issue.



    • Flow is determined by the network conditions around the valve.
    • Unless the valve is in a gravity system feeding a reservoir changing its opening will not necessarily increase the flow.


    • If you need further support and cannot find the cause of the problem, please send a copy of your network to the Support inbox (support@innovyze.com ) and we can investigate further.



    Thank you.

    Patrick Moore

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •