Results 1 to 2 of 2

Thread: Modelling a temporary blockage

  1. #1

    Join Date
    Oct 2015
    Posts
    1

    Modelling a temporary blockage

    I need to model a temporary blockage in a sewer, the idea is to add flow control (orifice) which I can set to open and close at specific times.
    I am struggling with the RTC can any one suggest the best way to model this.
    Thanks

  2. #2
    Forum Moderator

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    133
    Using an RTC table with the limiting discharge and particular dates/times is probably the best approach. Alternatively a sluice gate or gated weir will also do the job with the gates closing to represent the blockage.
    Last edited by Duncan Kitts; October 29, 2015 at 01:51 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •