Results 1 to 6 of 6

Thread: infoSWMM Result Pending. What does it mean & how to resolve?

  1. #1
    Member
    Join Date
    May 2013
    Posts
    48

    infoSWMM Result Pending. What does it mean & how to resolve?

    Occasionally RUN MGR shows "Results pending" icon beside the "report" button.
    Rerunning will dump-it and sometimes resolve the issue.
    However currently I have model where I cant get this "Stoppage" to go away

    LoadOutputSouce will load the Engine output but "info" results never become available.


    Not sure what I am doing wrong. Even making the run much shorter with less reporting doesn't seem hep.

    Would be grateful of any info or help as to cause/avoidance/ etc.
    Stewart.
    S w Sargent, Services Development Engineer, Marlborough District Council, New Zealand.
    (40 years of modelling in 4 countries, thus far , and still learning)

  2. #2
    Member
    Join Date
    May 2013
    Posts
    48
    Saved then shutdown and restarted the model.
    Problem has disappeared (hopefully for good)
    Still don't know what caused it or how to avoid t?
    Stewart.
    S w Sargent, Services Development Engineer, Marlborough District Council, New Zealand.
    (40 years of modelling in 4 countries, thus far , and still learning)

  3. #3
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146
    Hello Stewart,
    "Still Learnning" is a a good attitiude to have. Regarding your problem the results pending is just telling you that the program has not moved the RPT, OUT files from the .OUT/Scenario/Scenario NAME/OUT directory to up one level to the OUT/Scenario/Scenario Name directory - see image 1. If I click on the Results Pending icon shown in image 2 it will load the OUT and RPT files for my model. Does this happen for you?
    Best Regards as Always,
    Bob Dickinson

    Image 1 - OUT directory for a Model

    2014-12-10_0825.jpg


    Image 2 - Run Manager with a Red Results Pending Icon
    2014-12-10_0820.jpg

  4. #4
    Member
    Join Date
    May 2013
    Posts
    48
    BOB
    Thanks
    Re " Does this happen for you?"
    No.. not really.... basically the job seems to hang and the problem only seem to go-away once I closed the model and then reopened. (see my Dec10, 2014, 06:19 PM post)
    S
    Stewart.
    S w Sargent, Services Development Engineer, Marlborough District Council, New Zealand.
    (40 years of modelling in 4 countries, thus far , and still learning)

  5. #5
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146
    Thanks for your understanding Stewart, We will try to fix this pending blockage as soon as we understand the problem better - see my email to you from a few minutes ago. water_drop_character_turning_valve_800_clr_16072 (2).jpg

  6. #6
    Senior Member

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    146
    Hello SwS,
    I am up to (38 years of listening about modelling, thus far , and still learning, at least I hope so)! Customers like yourself make it easier to continue learning - i appreciate it!

    Kind Regards,
    Robert Dickinson
    Product Sector Leader (PSL, see below for details) for @Innovyze Inc.
    9340 Pontiac Drive, Tampa, Florida USA 33626
    Telephone: 813-712-0664

    Links or Email Addresses that may interest you My PSL Software and My Help for Other Software
    robert.dickinson@innovyze.com
    support@innovyze.com
    http://blog.innovyze.com/
    http://www.innovyze.com/products/
    http://forums.innovyze.com/forum.php

    [IMG]file:///C:\Users\dickinre\AppData\Local\Temp\msohtmlclip1\ 01\clip_image001.jpg[/IMG]
    PSL: #InfoSWMM , #InfoSewer, H2OMAP SWMM, H2OMAP SEWER and InfoSWMM Suite, InfoSWMM 2D
    Other : ICM, ICM SE, SWMMLive, Any Innovyze Product, SWMM5

    http://www.swmm5.net/
    http://swmm5code.ning.com/
    https://twitter.com/RDickinson
    http://www2.epa.gov/water-research/s...ent-model-swmm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •