Results 1 to 4 of 4

Thread: Dam/ Broad Crested Weir in InfoWorks RS

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Sep 2014

    Post Dam/ Broad Crested Weir in InfoWorks RS


    I am currently doing a river simulation and modelling. One part of my work include testing the river behaviour before and after the construction of a dam to determine the flood occurrence, which means I have to come out with two river models. In the case after the dam is constructed,seems that there are water accumulating behind the dam after I have run the simulations. I have attached the image of the relevant case.


    Supposingly, there should not be any water, or the water level should not be that high as overspills/ flood tend to occur. Thus, it there any possible alternatives to reduce the water level behind the dam/ weir?
    Last edited by yang92; September 19, 2014 at 05:06 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts