Pressure zone delineation Infowater 10.5

[cricks]

The press release announcing Infowater 10.5 mentioned that "...pressure zone delineation and coloring can now be performed on the fly...".
How do I use this feature? I can't find any information about it in the menu options or help file.

[Shawn Huang]

In the control center toolbar, there are three new buttons (Setup, RUn, and show pressure zones). These three buttons are what press release talks about.

[cricks]

I don't see those buttons. My control center toolbar looks like this:

Capture.JPG

I definitely have 10.5 installed. Do I need a add-on extension enabled? Or did I need to remove Infowater 10 before installing 10.5?

[Shawn Huang]

I suggest you to download the installer from innovyze website again and reinstall 10.5. And yes, to remove InfoWater 10 before installing 10.5.

[cricks]

I re-downloaded the installer, removed Infowater, and reinstalled it. I still do not have those buttons on the toolbar.

[Shawn Huang]

I suggest that you call our support line - 626-568-6869. It is likely for us to look into your screen.

[Patrick Moore]

The Pressure Zone manager is part of the Executive Suite. Depending on what licensing you may have this extension may or may not appear.

Below is a list of the different extensions available and which licensing option is needed for a given extension: (Click for a larger image)
Suite Extensions.png

You can also find this list on the following webpage: http://www.innovyze.com/products/infowater/
.

If you have an Executive Suite license the Pressure Zone manager is accessed in the InfoWater menu under: InfoWater-> Tools-> Pressure Zone Manager
Menu capture (click for larger image)
PZM Tool.jpg