Results 1 to 2 of 2

Thread: Simulating an inflow onto surface

  1. #1

    Join Date
    Apr 2014
    Posts
    1

    Simulating an inflow onto surface

    Hello, I am trying to model a river's outflow from a storm onto the surface of my model. I have the peak flow known and am modelling that as an inflow event at a point. Upon running the simulation onto my 2D mesh, it does not load any inflow and there is certainly no surface water. I have checked that the inflow event and point name match and that the inflow event is checked under the simulation parameters.

    Could anyone offer any incite? Regards, Andrew.

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Posts
    125
    Is your poitn a 2D point source? It needs to be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •