Results 1 to 3 of 3

Thread: Flooding themes in ICM

  1. March 3, 2014, 09:29 AM #1
    Scott Leslie
    Scott Leslie is offline
    Join Date
    Mar 2014
    Posts
    8

    Flooding themes in ICM

    Hi all,

    Is there a way in ICM to render flood extents or contours depending on the source of the water eg foul/combined and storm/other?

    Regards
    Scott
    Reply With Quote Reply With Quote
  2. March 3, 2014, 02:47 PM #2
    Robert Dickinson
    Robert Dickinson is offline
    Senior Member

    Innovyze Employee


    Join Date
    Feb 2013
    Posts
    146
    Hi Scott,
    If you used a pollutant or water quality constituent tracer for either foul water or storm flow you can make a contour of the two types of concentration.
    Regards,
    Bob Dickinson
    Reply With Quote Reply With Quote
  3. March 4, 2014, 06:43 AM #3
    Scott Leslie
    Scott Leslie is offline
    Join Date
    Mar 2014
    Posts
    8
    Hi Bob, thanks for your reply. There was no pollutant modelling undertaken, so its can't be done with the results we have.

    I have another question though - is it possible to export the flow direction arrows of the 2D mesh results (for a given time) to a GIS format?

    Regards,
    Scott
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules