PDA

View Full Version : infoWATER; DemandAllocation: Duty & Scaling NOT posting to DemandSet



Stewart Sargent NZ
April 13, 2015, 04:03 PM
Ver 11.5 Upgrade4 ArcGIS ver 10.2.2.3552

The WaterDuty & AllocationScaleFactor doesn't seem to work as per Help or User Manual

All that gets saved (posted) to the demand set is the original results achieved using the WaterDuty & AllocationScaleFactor values which existed BEFORE the Allocate Demand button was clicked.

When the Allocation Report & Water Duty Calculator is presented:


Changing the WaterDuty value does indeed change the AllocDemand & TotalDemand values but the new values don't seem to get saved to the DemandSet when OK is clicked, and
Changing the AllocationScalingFactor value does NOT change the AllocDemand & TotalDemand values


See attached. The values that got posted are just the 4.73 Demand (ie with the original values of 1.0 for WaterDuty & AcclocationScaleFactor) and NOT the AllocDemand (9.46) nor the more correct value of 18.92 calculated with the New WaterDuty & AllocationScaleFactor values (of 2.0) each.
103

Am I doing something wrong or missing something? Anybody have similar experiece or [polite <grin>] advice?

TIA

Taylor Barnett
April 15, 2015, 09:50 AM
Hi Stewart, we are investigating this issue and will get back to you. Could you send your contact information to support@Innovyze.com?

Stewart Sargent NZ
April 19, 2015, 07:08 PM
Done, Attention Taylor Barnett