PDA

View Full Version : Modeling Hydraulics inside a Wastewater Treatment Plant



sewermapguy
April 17, 2014, 07:48 AM
Has anyone used InfoWorks ICM to model the hydraulics of influent/effluent flows inside a wastewater treatment plant? Specifically, this would include raw sewage influent through Headworks through Primary Treatment through Secondary Treatment through Advanced Tertiary Treatment then the outfall. The model would include aeration tanks, settling tanks, clarifiers, chlorine contact tanks, wet wells, valves, manholes, and pumps inside a Plant. In our Plant we have all our piping, valves, pumps, and tanks in a GIS Database (ArcGIS 10.2.1 and a SQL Server 2008 R2 Enterprise Geodatabase).

Just curious if anyone has used InfoWorks ICM for something like this? If not, what do you recommend for this idea?

Tim Hayes
GIS Manager
San Jose/Santa Clara Regional Wastewater Facility

Robert Dickinson
April 23, 2014, 10:27 AM
Hello Tim,
There have been a few examples in the past of IWCS being using to model WWTP. Here are few references

http://www.ingentaconnect.com/content/wef/wefproc/2010/00002010/00000015/art00017?crawler=true

and this one from Ft Worth

http://www.freese.com/sites/default/files/Dynamic%20Hydraulic%20Modeling%20of%20a%20Wastewat er%20Treatment%20Plant.pdf

which covers these modeling topics

• Drivers for a Dynamic Integrated Large
WWTP Hydraulic Model
• Model Development
• Modeling Conduits and Bends
• Modeling Primary Clarifiers
• Modeling Filters and Chlorine Contact
Basins
• Integrating Collection System
Hydraulics with WWTP Hydraulics



I hope this helps,
Bob Dickinson

Kristian Ravnkilde
May 8, 2014, 10:31 AM
I've use IWCS for several WwTW's, not difficult and there's no reason why ICM shouldn't be as good. You may have to get information on head losses and/or head/ discharge curves from manufacturers of some of the equipment.