Results 1 to 2 of 2

Thread: Voids/no data in 2D modelling

  1. #1

    Voids/no data in 2D modelling

    Hi,

    My ground model already has voids (no data) where the buildings are, because of this i get errors when trying to mesh because it can't find heights everywhere.
    I assume this problem will be solved when i model the buildings as voids since it will not try to create a 2D zone there. Is there an easy way to let infoworks know that the no data shapes already are the voids?
    Thanks in advance.

    Grtz,
    T

  2. #2
    Forum Moderator

    Innovyze Employee



    Join Date
    Feb 2013
    Posts
    115
    Where the no data gaps are small, the meshing process will ignore them and the mesh element elevation taken from the available data for that mesh element. Where the gaps are greater than the mesh element size then the software will provide an error. The software will not automatically detect these as void areas.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •